MADRAS PRODUCTS

Main » Product Dettagli
  
Print Card
 

POLYSTON

Protection for rough marble and stone waterproofing primer with a "restoring effect"
NEWMADRAS Srl
 
Resistance
External|Internal
 
Type
protection
 
Surfaces
Vertical+Horizontal
 
Materials
Terracotta
Klinker
Natural stones
Porcelain Gres
Diorite
Marble
 
what advantages how

POLYSTON is stain-resistant and restoring protection suitable for indoor and outdoor porous stone surfaces.

Restores the treated material by bringing out the natural grain and colour tone, waterproofs the grouting, thereby sealing it once again to protect it from any water absorption and infiltration.

The treated surfaces have good anti-stain characteristics and allow for easier maintenance.

For the treatment of floors and facing material made from rough marble and granite, stone (serena, slate, porphyry, Cardoso), rock and antique marble, terracotta, clinker, stoneware, etc. and joints.

POLYSTON is ready for use and in the case of low porous materials, dilute one or more parts with SOLVENTE PER ESTERNI.

Apply on clean and dry substrates with a pure bristle brush (10x1.5 cm), roller or low pressurespray. Apply 2 coats at an interval of at least 6 hours.

The product is a primer and not a paint; let it absorb and even out before drying.

Indoor use: 2 days after the treatment, apply SOLWAX PIETRA on rough stone, and on floors, apply the water-based wax finish after another 2 days at least.


Packaging
L 1X12
L 5X4

Coverage

Depends on the absorption of the substrate. On average, the yield is 3 - 6 sq m/L (2 coats).
 


 
Precautions
Do not apply in the presence of persistent humidity and if you are not sure whether all the impurities have been neutralised (efflorescence).
Do not apply on very windy days or on substrates that are red-hot due to the sun.
Over time, POLYSTON can be absorbed by the surface when used outdoors. In this case, restore with a coat of diluted product, always on a clean and dry surface.
It is advisable to work in ventilated areas and if necessary, wear protective masks for organic solvents (A-type and brown).
Composition
Solvent
Composition Type
Liquid
Safety Data Sheet:
Polyston
dangerous for the environment
DANGEROUS FOR THE ENVIRONMENT
harmful
HARMFUL
Contains
Butyl acetate acrylic copolymer
Physical state liquid
Colour clear
Flash point >21°C
Specific weight 0.890 g/mL
Drying times 6 hours dust free; 48 hours to be treadable
Application temperature between 10 and 25 °C

New Madras srl
Via Mammianese Nord, 47 - 51017 Pescia (PT) - tel +39 0572 490053 - fax +39 0572 477053 - info@newmadras.it
P.Iva IT00468700471